Home / Services / Mold Engineering
Mold Engineering

Mold designs that are right before steel is cut

DFM analysis, Moldflow simulation and complete 3D/2D mold design for demanding automotive and industrial parts — delivered with clear reports your team can review.

Engineering first

Problems are cheapest to fix on screen

Most tooling issues — sink, warpage, weak gating, hard-to-machine features — can be predicted at the design stage. Our engineers review your part, simulate the molding process and design the tool so it runs right from the first trial.

Our team has strong experience with automotive plastic molds for the Japanese, US and European markets, and our 3D and 2D designers have over 10 years of experience on average.

  • DFM (Design for Manufacturability) analysis
  • Moldflow simulation: filling, packing, cooling, warpage
  • Complete 3D mold design and 2D detail drawings
  • Design to your mold standards and specifications
3D design of a large console carrier mold
Moldflow analysis

Simulate first, then build

Using the finite element method and Moldflow 2023, we simulate filling, packing, cooling and warpage. The results let us predict defects, optimize the part and the mold, reduce molding risk and control production cost.

You receive a detailed PPT report with clear explanations — not just colored pictures.

Moldflow fillMoldflow packMoldflow coolingMoldflow warpage
Deliverables

What you receive

DFM report

Draft, wall thickness, undercuts, gating and parting line recommendations.

View Case Studies

Moldflow report

Fill, pack, cool and warp results with clear conclusions in a detailed report.

View Case Study

3D mold design

Full 3D mold assembly: cooling, ejection, slides, lifters and hot runner layout.

2D drawings

Detailed 2D drawings, approved by you before any steel is ordered.

Preview Drawings

Software: Siemens NX · Autodesk Moldflow · AutoCAD. 3D data accepted in .prt, .stp/.step, .x_t, .igs, .jt and CATIA V5 formats.

Our design process

Clear steps. Customer approval at every key stage.

From your initial part data to released manufacturing drawings, we keep design decisions and revisions visible to your team.

START WITH YOUR REQUIREMENTS

A clear brief for the right tool

2D / 3D part data · Resin, shrinkage and surface finish · Cavity count, mold life and steel · Hot or cold runner requirements · Injection machine specifications · Customer mold standards

  1. 01

    DFM review

    GTS prepares the DFM report and recommendations for your review.

    Customer feedback → revise until confirmed
  2. 02

    Mold design

    We develop the mold design based on the agreed DFM and tooling requirements.

    Customer review → revise until approved
  3. 03

    Drawing & manufacturing review

    Confirm drawing approval and evaluate the design for manufacturing.

  4. 04

    Release & archive

    Release the manufacturing drawings and archive the approved design documents.

Before mold design begins, we confirm material shrinkage, gate type and location, and the injection machine specifications with you.

Design portfolio

Mold design projects

A selection of automotive molds designed by our team, from 750 mm interior trim tools to 2.5-metre instrument panel carriers. Click any project to see more views.

3D mold design: Instrument panel carrier (LHD)4 views
Large single-cavity mold

Instrument panel carrier (LHD)

Tier-1 automotive supplier · Europe
Mold size
2560 × 1500 × 1295 mm
Scope
DFM · Moldflow · 3D/2D design
3D mold design: Tailgate lower decorative panel4 views
Large exterior trim mold

Tailgate lower decorative panel

Tier-1 supplier · EV program
Mold size
2420 × 1845 × 1795 mm
Scope
DFM · Moldflow · 3D/2D design
3D mold design: Door main carrier4 views
Stack mold

Door main carrier

Tier-1 interior supplier · North America
Mold size
2000 × 1871 × 1760 mm
Scope
DFM · Moldflow · 3D/2D design
3D mold design: Main console carrier (LHD)4 views
Large interior mold

Main console carrier (LHD)

Tier-1 automotive supplier · Europe
Mold size
2175 × 1620 × 1645 mm
Scope
DFM · Moldflow · 3D/2D design
3D mold design: Front scuff plate, illuminated (RH/LH)4 views
Family mold RH/LH

Front scuff plate, illuminated (RH/LH)

Tier-1 interior supplier · North America
Mold size
1750 × 2050 × 1064 mm
Scope
DFM · Moldflow · 3D/2D design
3D mold design: B-pillar lower decorative panel (RH/LH)5 views
Family mold RH/LH

B-pillar lower decorative panel (RH/LH)

Tier-1 automotive supplier
Mold size
1700 × 2400 × 1397 mm
Scope
DFM · Moldflow · 3D/2D design
3D mold design: Vent center + cowl lower4 views
Exterior mold

Vent center + cowl lower

Tier-1 supplier · Japanese OEM program
Mold size
1270 × 2175 × 1080 mm
Scope
DFM · Moldflow · 3D/2D design
3D mold design: Rear door main carrier (RH)4 views
Interior carrier mold

Rear door main carrier (RH)

Tier-1 automotive supplier · Europe
Mold size
1430 × 1605 × 1218 mm
Scope
DFM · Moldflow · 3D/2D design
3D mold design: Driver panel + fuse box panel4 views
Interior mold

Driver panel + fuse box panel

Tier-1 automotive supplier · Europe
Mold size
1430 × 990 × 1180 mm
Scope
DFM · Moldflow · 3D/2D design
3D mold design: Waterproof cover plate (RH/LH)5 views
2K mold

Waterproof cover plate (RH/LH)

Automotive OEM program
Mold size
1250 × 1600 × 869 mm
Scope
DFM · Moldflow · 3D/2D design
3D mold design: B-pillar lower decorative panel (RH/LH)5 views
Family mold RH/LH

B-pillar lower decorative panel (RH/LH)

EV OEM program
Mold size
1620 × 1240 × 1223 mm
Scope
DFM · Moldflow · 3D/2D design
3D mold design: Front pocket (RH/LH)5 views
Family mold RH/LH

Front pocket (RH/LH)

Japanese OEM program
Mold size
1220 × 1600 × 1120 mm
Scope
DFM · Moldflow · 3D/2D design
3D mold design: Front door upper panel (RH/LH)5 views
Family mold RH/LH

Front door upper panel (RH/LH)

Japanese OEM program
Mold size
1300 × 1600 mm
Scope
DFM · Moldflow · 3D/2D design
3D mold design: Speaker grille, quarter trim (LH)4 views
Interior trim mold

Speaker grille, quarter trim (LH)

Tier-1 interior supplier · North America
Mold size
750 × 1450 × 739 mm
Scope
DFM · Moldflow · 3D/2D design
3D mold design: Interior rear-view mirror body (RH/LH)5 views
Family mold RH/LH

Interior rear-view mirror body (RH/LH)

EV OEM program
Mold size
850 × 1140 × 876 mm
Scope
DFM · Moldflow · 3D/2D design
3D mold design: Upper cover plate4 views
Interior mold

Upper cover plate

Automotive OEM program
Mold size
800 × 1000 × 896 mm
Scope
DFM · Moldflow · 3D/2D design

Customer names are withheld to respect confidentiality agreements.

Need design support for your next tool?

Send us your part data for a DFM review, or ask about design-only services for your own toolmaker.